西藏拿若铜(金)矿床隐爆角砾岩流体包裹体研究   总被引：3，自引：0，他引：3  

高轲 《地质与勘探》2016,52(5):815-825

隐爆角砾岩是西藏拿若矿床的重要组成部分,赋存厚大的铜矿体。笔者将隐爆角砾岩中流体分成两个主要期次,并对这两期流体开展包裹体研究。通过包裹体岩相学和显微测温认为:角砾中的石英(早期)包裹体形状均匀呈椭圆形,大小主要在2~5μm;胶结物中石英(晚期)包裹体形状可见椭圆状、长条状和近方形,大小主要在2~7μm。早期流体的包裹体可分为两个阶段,均一温度分别为早阶段280~368℃和晚阶段208~305℃,盐度分布为(4.65~12.73)%Na Cleq。晚期流体的包裹体同样可分为两个阶段,其均一温度分别为早阶段309~588℃和晚阶段232~335℃,盐度变化为(3.55~12.51)%Na Cleq,两个阶段的流体分别属于高温、中低盐度和中高温、中低盐度流体。L-V型包裹体激光拉曼分析显示:包裹体中气泡成分主要为气态H2O和少量CO2。拿若矿床至少经历两次隐爆作用,由晚期沸腾热液引起,并未成矿。成矿作用发生于隐爆角砾岩形成之后。  相似文献   

Evidence for a shock-metamorphic breccia within a buried impact crater,Lake Raeside,Yilgarn Craton,Western Australia     

A. Glikson  A. Hickman  R. Crossley 《Australian Journal of Earth Sciences》2016,63(1):99-109

Mineral exploration drilling 60 km west of Leonora in 2008 intersected >95 m of poorly consolidated granitoid-dominated breccia at the base of a Cenozoic paleochannel beneath Lake Raeside. The breccia, initially interpreted as a kimberlite, is composed of poorly consolidated fragments of granitic gneiss, felsite and metamorphosed mafic rock within a matrix of fine to medium-grained breccia. Microscopic examination revealed quartz grains displaying well-developed planar deformation features (PDFs) dominated by the ω? {1013} planar set, diaplectic silica glass and diaplectic plagioclase glass. These features constitute the diagnostic hallmarks of shock metamorphism owing to high-velocity impact of a large meteorite or asteroid. The PDFs in quartz grains of the breccia are distinctly different from metamorphic deformation lamellae produced tectonically or in diatremes. Airborne total magnetic intensity data suggest an outline of an 11 km-diameter crater, consistent with the significant thickness of the shock-metamorphosed breccia at >95 m, suggestive of the existence of a large impact structure.  相似文献   

Distribution of authigenic albites in a limestone succession of the Helvetic Domain, eastern Switzerland     

Pauline Rais  Beat Louis-Schmid  Stefano M. Bernasconi  Eric Reusser  Helmut Weissert 《Swiss Journal of Geoscience》2008,101(1):99-106

  相似文献   

甘肃北山地区南金山金矿床隐爆角砾岩体的发现及成矿规律研究   总被引：5，自引：1，他引：5  

沈远超  申萍  曾庆栋  刘铁兵  李光明 《矿床地质》2006,25(5):572-581

地质研究发现,南金山金矿区出露的下石炭统白山组上岩组的部分岩石为隐爆角砾岩,其中厚层-块状变花岗质砂砾岩为隐爆岩浆角砾岩,厚层-块状变凝灰质砂砾岩为隐爆凝灰角砾岩。隐爆角砾岩体呈近EW向带状分布,隐爆岩浆角砾岩分布于岩体中部,构成岩体的内带,隐爆凝灰角砾岩对称分布于岩体南北两侧,构成岩体的外带。经矿床地质研究,提出了新的认识,认为该矿床的形成受隐爆角砾岩体及隐爆断裂构造的控制,金矿体分布于隐爆角砾岩体外带的隐爆凝灰角砾岩及隐爆断裂中;提出了隐爆角砾岩体外带成矿、对称成矿和双层成矿等3条矿体分布规律。采用EH-4连续电导率成像仪进行了深部地球物理测量,测量结果验证了隐爆角砾岩体控矿及其成矿规律。  相似文献   

论兰坪金顶超大型铅锌矿容矿角砾岩的成因   总被引：11，自引：0，他引：11       下载免费PDF全文

王安建 高兰刘俊来  曹殿华修群业 范世家 《地质学报》2007,81(7):891-897

兰坪金顶超大型铅锌矿容矿角砾岩分为两类：一是构造-膏溶角砾岩,不含矿,胶结物孢粉组合显示晚三叠世特征;二是底辟-侵位角砾岩,含铅锌、黄铁矿、天青石和硬石膏矿化,是重要的矿石类型之一,呈脉状产出,系构造-膏溶角砾岩底辟-侵位的产物。它们并非是古新世滑塌堆积成因的角砾岩,不应划归于老第三系云龙组。流行的金顶超大型铅锌矿成矿模式需要重新审定。  相似文献   

我国低钛月海型模拟月壤初始物质选择的地球化学依据   总被引：1，自引：0，他引：1  

刘春茹  王世杰  冯俊明  李雄耀  付绍洪  欧阳自远  郑永春 《矿物岩石》2007,27(3):28-33

以Apollo14月壤样品和美国JSC-1模拟月壤的地球化学特征为基础,结合我国低钛玄武岩火山的分布,对我国不同地区新生代玄武岩的化学成分、年龄、储量等方面进行对比分析结果表明,滇西北金沙江地区和吉林辉南红旗林场-四海地区的玄武质火山喷发物的化学成分与Apollo14月壤样品和美国JSC-1模拟月壤相似,比较适合用于我国低钛月海玄武岩模拟月壤研制的初始物质。野外地质调查发现,吉林省辉南县金川镇红旗林场—四海一带产出的玄武质火山渣为距今1600 a的该玄武质火山岩的喷发物,其储量大、质地纯、粒度均匀,而且比滇西北金沙江地区最近一期的玄武质火山渣新鲜,最适合作为我国低钛月海玄武岩模拟月壤研制的初始物质。  相似文献   

鲁西大井头地区隐爆角砾岩特征及其金成矿性研究          下载免费PDF全文

王照波  刘金民  臧学农  刘巨龙 《地质找矿论丛》2006,21(3):168-172

大井头地区隐爆角砾岩主要分布在大井头、归后庄和埠西桥等地,隐爆角砾岩与中生代形成的铜石杂岩体具有成因关系.结合化学分析、微量元素、激电中梯测量资料,分析了该区隐爆角砾岩的金成矿性,确定了归后庄、埠西桥为不成矿隐爆角砾岩,查明大井头隐爆角砾岩具有较好的成矿前景,并通过激电中梯测量圈定了一个极具成矿前景的靶区.  相似文献   

Cyclic palaeokarst surfaces in Aptian peritidal carbonate successions (Taurides, southwest Turkey): internal structure and response to mid-Aptian sea-level fall     

&#x;smail mer Y&#x;lmaz  Demir Alt&#x;ner 《Cretaceous Research》2006,27(6):814-827

The sedimentology and cyclic stratigraphy of palaeokarst structures in Aptian peritidal carbonate successions are interpreted using field and laboratory microfacies analyses of closely spaced samples from measured outcrop stratigraphic sections in southwest Turkey. Cycles displaying shallowing-upward metre-scale cyclicity are generally composed of lime mudstones/wackestones/packestones at the bottom and stromatolites or lime mudstones with charophytes and ostracods at the top. Subaerial exposure structures such as in situ karst breccias, dissolution vugs/pipes, mud cracks and sheet cracks are encountered at the top of the cycles. The presence of limestone layers between the successive karst breccia levels indicates that they are in situ palaeokarst structures, not recent karstifications or deep penetration from the upper palaeokarst surface down to the older strata. Palaeokarst breccia deposits are interpreted as mantling breccia formed as a result of epikarstification. Three main palaeokarst levels are recorded in nearly all sections. The sedimentology of the palaeokarst breccias, their position in cyclic peritidal carbonates and the biostratigraphic framework are used to trace the record of the global mid-Aptian sea-level fall in the southwest Taurides. The successive occurrences of three karst breccia levels close to the mid-Aptian sea-level fall correspond to falling periods of high-amplitude sea-level fluctuation within a late high-stand or early fall condition of a third-order sea level.  相似文献   

Albite vein formation during exhumation of high-pressure terranes: a case study from alpine Corsica   总被引：1，自引：0，他引：1  

J. A. MILLER  I. CARTWRIGHT 《Journal of Metamorphic Geology》2006,24(5):409-428

The formation of late‐stage veins can yield valuable information about the movement and composition of fluids during uplift and exhumation of high‐pressure terranes. Albite veins are especially suited to this purpose because they are ubiquitously associated with the greenschist facies overprint in high‐pressure rocks. Albite veins in retrogressed metabasic rocks from high‐pressure ophiolitic units of Alpine Corsica (France) are nearly monomineralic, and have distinct alteration haloes composed of actinolite + epidote + chlorite + albite. Estimated P–T conditions of albite vein formation are 478 ± 31 °C and 0.37 ± 0.14 GPa. The P–T estimates and petrographic constraints indicate that the albite veins formed after the regional greenschist facies retrogression, in response to continued decompression and exhumation of the terrane. Stable isotope geochemistry of the albite veins, their associated alteration haloes and unaltered hostrocks indicates that the vein‐forming fluid was derived from the ophiolite units and probably from the metabasalts within each ophiolite slice. That the vein‐forming fluid was locally derived means that a viable source of fluid to form the veins was retained in the rocks during high‐pressure metamorphism, indicating that the rocks did not completely dehydrate. This conclusion is supported by the observation of abundant lawsonite at the highest metamorphic grades. Fluids were liberated during retrogression via decompression dehydration reactions such as those that break down hydrous high‐pressure minerals like lawsonite. Albite precipitation into veins is sensitive to the solubility and speciation of Al, which is more pressure sensitive than other factors which might influence albite vein formation such as silica saturation or Na:K fluid ratios. Hydraulic fracturing in response to fluid generation during decompression was probably the main mechanism of vein formation. The associated pressure decrease with fracturing and fluid decompression may also have been sufficient to change the solubility of Al and drive albite precipitation in fracture systems.  相似文献   

460铀-钼矿床控矿因素及矿床成因探讨   总被引：3，自引：2，他引：3  

沈光银 《矿产与地质》2007,21(5):509-514

460矿床是上世纪80年代在冀北沽源中生代火山断陷盆地西部发现的大型铀-钼矿床。在对该矿床野外实地调研的基础上，结合矿床地质详查和矿床专题科研报告的综合分析，对矿床的控矿因素进行了系统总结。研究结果表明，矿床受NE向断裂（F45）和火山构造的联合控制；火山活动晚期沿断裂和中心式火山机构侵入的次流纹斑岩体是矿床定位的决定性因素；铀-钼矿化主要产于次流纹斑岩体产状变异部位或接触带附近；容矿构造为次流纹斑岩体接触带构造、隐爆角砾岩和J3z^3-5川层流纹岩中的层间裂隙带。研究认为，铀矿化受断裂构造、火山机构、岩浆活动、热液蚀变等作用的复合控制，其中火山口-火山通道相的次流纹斑岩体是主要的控矿因素。  相似文献